Autoterm There are 11 products.

Subcategories

• 

  Water Heaters Binar

  Binar - Russian creation which is not inferior to foreign analogues in any way. Besides, the price of a domestically built device is much lower than the price of foreign solutions. Pre-start heater has smaller overall dimensions, which allows owners of vehicles to get more options for installation. Compact dimensions will allow to deliver the device to any point of the country or world without overpaying for dimensions. The factory provides a warranty on the device for 18 months. The ability of the built-in module to independently identify errors will help car owners quickly find out the cause of the problem, and quickly take measures to eliminate it. The error code can be seen on the preheater remote control indicator. It is displayed automatically.

  Thanks to Binar heater, the period of time spent on gasoline heating is over. This was taken care of by the Russian manufacturer Teplostar, which designed and brought to market a gasoline preheater. The compact, reliable and safe device performs its tasks well even if it is minus 45ºC outside the window! In addition, the Binar heater has an improved potential and can function as a gasoline engine heater and preheater (up to 4 liters), running on a liquid cooling system. The device is used to heat the interior and windshield, as well as to remove icing. The device functions independently of the motor.

  Binar has a few options for controlling the device:

  • A remote timer, which is included in the package and is installed with a bracket or scotch in a convenient place for the driver;
  • If there is a free channel, the device can be controlled by means of an alarm;
  • remote control of SMS commands, voice calls, iOS and Android applications.

  The device is switched on and off at a set time or when it receives a command from one of the control devices. This is a very economical device: only 0.7 l/hour is consumed in 60 minutes.

  The advantages of the Binar heaters are following:

  - Compact, can be installed in vertical and horizontal position;

  - Heater function; - Control from the remote timer;

  - Possibility to connect a GSM modem instead of or together with a remote control timer. Control via voice calls or via mobile application for iOS and Android via SMS commands (the GSM set is supplied separately);

  - Affordable price (in comparison with foreign analogues) and high quality.

  When starting the Binar engine preheater, the fuel pump of the heater supplies fuel to the Binar combustion chamber, where a fuel-air mixture is formed, which is ignited by the Binar glow plug. The heat generated through the heat exchanger heats up the coolant, which passes through the small engine circuit due to the operation of the liquid heater pump. When the coolant heats up to 85 degrees, the Binar engine heater switches to low-power mode. After working the set time (20-60 minutes) or receiving a command from the control device, the Binar heater switches off. Your car will be warmed up and ready to go!

  The installed Binar engine preheater is connected to the vehicle's fuel and cooling systems and to the on-board power supply.

  We offer for sale the following Binar heaters: Binar-5B-Compact 12V-GP (gasoline), Binart-5B-Compact 12V-GP (gasoline) with SIMCOM modem, Binar-5D-Compact 12V-GP (diesel),Binar-5D-Compact 12V-GP (diesel) with SIMCOM modem, Binar-5D-Compact 24V-GP (diesel), Binar-5S (gasoline), Binar-5S-Comfort (gasoline) with SIMCOM modem, Binar-5S (diesel), Binar-5S-Comfort (diesel) complete with SIMCOM modem,Binart-5S (diesel) 24V.

  You can purchase various Binar heaters listed above and parts for them at our store. Why buy on our site? Because we offer only solutions which have been tested by time and Siberian winter. There are no little things in the field of autonomous heating. In areas where there is a lot of snow and cold spread for hundreds of kilometers, the cost of broken heating unit could be someone’s life! We always remember it and therefore we are never wrong! We offer worldwide international delivery, timely technical support and all the heaters we sell are subject to warranty from the manufacturer.At first we have got customers in all parts of the world and then our customers have become our friends. This online shop has become an extension of our movement towards the globe, and the fact that you are reading this message is a confirmation that you are on the right path!Feel free to contact us at any time.We speak your language and can assist you with pleasure. We are available via e-mail.

• 

  Air Heaters Planar

  Autonomous heater Planar-2D-12-S was created by Russian engineers taking into account our severe frosts. Reliable and qualitative device gives the chance to motorists to forget about cold salons and equipment breakdowns because of low temperature. To work with the device it is necessary to have a nominal 12V supply voltage, so the Planar-2D-12-S is great for owners of cars, vans, small trucks.Overall dimensions and standard mounting places are identical to German autonomous heaters, so the Planar-2D-12-S air heater is easily installed instead of them. Thus, the compact sizes expand possibilities of installation of system. So, except for the trunk, if the gap between the floor and the seat is enough, an autonomous heater Planar-2D-12-S is installed under the back seat. Then the diesel fuel is filled with diesel directly from the car's tank.The innovative model has become popular among Russian drivers. Reviews about Planar-2D-12-S confirm that this air heater has proved itself perfectly in the difficult climatic conditions of Russia. With this high-quality, reliable and durable autonomous heater you will love winter trips in a car.Advantages of the Planar-2D-12-S air heater: it works quieter and more economically, thanks to a well thought-out design and a collectorless motor of its own production.Autonomous operation modes are set manually, depending on the required power or desired temperature, and independently works the engine or not. Heat output: 0.8-2.0 kW.

  Reviews about Planar-2D-12-S confirm: when the motor is switched off for a long time, the device consumes only 10 W, and with the working power unit - 24 W.Buying a heater Planar-2D-12-S means saving: domestic device consumes less diesel than competitors - from 0.1 to 0.24 liters per hour, and its cost is several times cheaper.Function of automatic self-diagnostics of the heater allows to notice in time a malfunction, to eliminate it at the initial stage (at a choice of a complete set with the electronic panel).

  The Planar 4DM2-12 air heater, developed by domestic engineers, has become a worthy competitor for foreign counterparts. The device is adapted to the conditions of harsh winters, and works flawlessly at low temperatures (down to -45 ° C). It is confirmed by numerous reviews about Planar 4DM2-12. Users note the reliability of the heater, good performance and economy. Plus, it attracts that for its work the start of the engine is not necessary.The 4DM2-12 3 kW planar is equipped with a 7 litre plastic fuel tank. The power consumption ranges from 10 to 42 watts. Heat output level is in the range from 1 to 3 kW. In a standard complete set work of the heater is regulated by the keyboard control panel "PU-10M". As an additional option, the control panel is equipped with a remote temperature sensor, which expands the possibilities of the device.A more advanced option is the possibility to buy Planar 4DM2-12 with PU-8M, which has a four-digit LED indicator, 2 LEDs and 3 buttons, as well as a transient tourniquet. Thus, there is a possibility to adjust the air heater Planar 4DM2-12 in terms of power level and temperature. It will also be possible to control the temperature indication from one of the three sensors that are integrated into the heater, remote control or cabin, as well as will be visible fault codes that occur when the device is not functioning. This will help you understand more quickly what caused the failure. For example, if two power-up attempts fail, the heater stops and the remote displays an error message.

  Planar 44-D-12 air heater will relieve the drivers of vehicles with a voltage of 12 volts from the discomfort associated with the cold. Today, the heater with a maximum heat output of 4 kW is presented in the market with an improved model Planar 44dD-2-GP-S with a glow plug "GP" manufactured by Kyocera (Japan), sealed connectors Tyco Electronics and an improved body. As the Planar 44-D-12-GP-S is mentioned, the design of the device is reliable and easy to operate and maintain.

  You can buy Planar heaters and parts for them at our store. Why buy on our site? Because we are offering only solutions which have been tested by time and Siberian winter. There are no little things in the field of autonomous heating. In areas where there is a lot of snow and cold spread for hundreds of kilometers, the cost of broken heating unit could be someone’s life! We always remember it and therefore we are never wrong! We are available via e-mail and offer other options.

• 

  Autoterm Controllers

• 

  Autoterm Parts

  We offer the following Teplostar parts in our online store for sale.

  • Control units - devices which provide control of the heater in conjunction with the control panel.The control unit performs the following functions: initial diagnostics (health check) of heater units at startup,diagnostics of heater units during the whole operation,turning on and off the heater on command from the control panel,set temperature control,combustion process control,automatic activation of the ventilation mode after the end of the combustion process,automatic shutdown of the heater: when one of the monitored units becomes inoperative, when the temperature of the heat exchanger, the supply voltage exceeds acceptable limits, when the flame breaks down in the combustion chamber.
  • Temperature sensor for the heater Teplostar is necessary to monitor the operating temperature of the heater and monitor the correct functioning of the latter.
  • Flame indicators - are used for pre-start liquid heaters 14TS-10 Teplostar, both for 12 and 24 volt versions of the device, for trucks, special equipment, buses, tractors.
  • Combustion chamber the volume formed by the aggregate of engine or furnace parts in which the combustion of a combustible mixture or solid fuel takes place. The design of the combustion chamber is determined by the working conditions and the purpose of the mechanism / furnace as a whole; heat resistant materials are generally used. Meant to organize combustion process for fuel-air mixture.
  • Air blower - consists of an electric motor with an attached snail. An impeller is mounted on the shaft of the electric motor from the side of the cochlea, and on the other hand, a fan.The impeller with a cochlea during rotation of the electric motor shaft forms a stream of air that enters the combustion chamber to provide combustion, and also purges the combustion chamber to cool and remove remaining fuel and moisture before starting and ending the combustion process.The fan creates a stream of air, which, passing through the radiators of the heat exchanger during heater operation, heats up and enters the vehicle interior.
  • Remote controllers PU-11-12V and PU-11-24V are intended for use as part of the pre-heater 14TS-10-12V and 14TS-10, respectively.The remote control provides manual and automatic control of the heater, as well as the output of information necessary for the user to the indicator light.
  • Glow plug provides ignition of the fuel mixture during heater start-up.The current consumption must be in the range from 3 to 5.2 A. The test time is not more than 90 seconds. The time between switching on is at least 180 seconds.It is forbidden to check a candle with a voltage of more than 24 V.
  • Heat exchanger is designed to transfer heat from the hot gases generated from the combustion of the air-fuel mixture to radiators, which in turn transfer heat to the air flow passing along the fins of the radiators.
  • Fuel pump - Designed for dosed fuel supply to the combustion chamber.The fuel pump is operated by electrical pulses sent by the control unit. The pulse frequency depends on the current heater performance.Fuel pump mounted on rubber shock absorber.The fuel pump is preferably mounted closer to the fuel tank and lower than the lower fuel level in the fuel tank.

  You can purchase Teplostar parts listed above and other parts for it at our store. Why buy on our site? Because we offer only solutions which have been tested by time and Siberian winter. There are no little things in the field of autonomous heating.In areas where there is a lot of snow and cold spread for hundreds of kilometers, the cost of broken heating unit could be someone’s life! We offer worldwide international delivery, timely technical support and all the heaters we sell are subject to warranty from the manufacturer.Please,request any part directly by contacting us.