Control unit SG1577, Suitable for...
Designed for heating before starting the engine with a working capacity of 12 liters. Hydronic 35 is ideal for installation in buses, trucks, container constructions, machinery, ships. Hydronic 35 heating power is 35 kW., that facilitates the most rapid and efficient heating of engine, vehicle interior, cabins, truck cabs.
Eberspacher liquid heater Hydronic, offered by us for sale, operates independently of the engine and has a double advantage: pre-heating the inside of the car and the engine. Heater is integrated into the water cooling circuit of the engine. The received thermal energy is transferred to the car’s own heat exchanger and gradually, in the form of ...
Eberspacher liquid heater Hydronic, offered by us for sale, operates independently of the engine and has a double advantage: pre-heating the inside of the car and the engine. Heater is integrated into the water cooling circuit of the engine. The received thermal energy is transferred to the car’s own heat exchanger and gradually, in the form of warm air, enters the vehicle through the existing air ducts. The residual heat of the cooling water is used to warm up the engine. And in the summer, the Eberspacher Hydronic heater can be easily converted into an autonomous ventilation system. Practical controls, such as the Espar digital timer or the innovative Eberspacher remote control, ensure total comfort.
For passenger cars, engine preheaters differ in two main parameters: the type of fuel (gasoline / diesel) and the heater power (4kW / 5kW). Hydronic 4kW is designed for cars with an engine capacity of up to 2 liters, and Hydronic 5kW for cars with an engine capacity exceeding 2.0 liters. Also indisputable advantage of Hydronic heaters is the presence of two versions — compact versions with a built-in liquid pump, and separated, where the pump is taken out of the main unit. This allows you to place the heater in absolutely any car, even with a very close engine compartment, without violating the installation technology. Differences in layout do not affect the price. Pre-heaters for passenger cars are supplied with an assembly kit, but without a control device.
Remember that improper installation may entail the rubbing of hoses, electrical wiring, and that is very important fuel line. This in turn directly affects the safety and security of your car. For low-tonnage commercial vehicles with on-board network voltage of 24V and engine capacity up to 5.0 liters, there is a special version Hydronic 5kW.Eberspeher Hydronic D12 is recommended for installation on trucks and special machinery with engine capacity from 6,0l to 12l. The voltage of the onboard network can be 12V or 24V.Hydronic D35 is designed for large vehicles (such as mining dump trucks), or for passenger buses, where it is necessary to heat not only the engine, but also the interior.
The device has significantly improved environmental parameters of the exhaust. During operation, it consumes very little fuel. Hydronic not only works in preheating mode, but also warms up an engine that is already running, if necessary. Installation in the car preheater increases engine life.The device is installed in the space of the coolant circulation system from the engine. Heat energy leaves the vehicle exchanger and is distributed through the cabin.
It is important to take into account that all cars are different and it is impossible to take into account all the nuances. Therefore, the price may increase due to additional materials for installation not provided for in the installation kit of the heater, as well as due to possible necessary works for correct installation (for example: removing the fuel tank, front bumper, connecting the additional alarm channel, connecting the climate control to warm the cabin when working preheater, etc., etc.)
Benefits: The ability to connect an analog start via gsm without soldering to the timer. As a result, it is possible to launch an analog from the phone without setting a timer at all.
Ability to reset errors, including those that lead to blocking of the heater, through a timer (Sooooo useful feature for long journeys).The hose in the assembly kit has curved fragments, which excludes collapse.
You can buy Eberspacher Hydronic heaters at our store. Why buy on our site? Because we are offering only solutions which have been tested by time and Siberian winter. There are no little things in the field of autonomous heating. In areas where there is a lot of snow and cold spread for hundreds of kilometers, the cost of broken heating unit could be someone’s life! We always remember it and therefore we are never wrong! We offer worldwide international delivery, timely technical support and all the heaters we sell are subject to warranty from the manufacturer. At first we have got customers in all parts of the world and then our customers have become our friends. This online shop has become an extension of our movement towards the globe, and the fact that you are reading this message is a confirmation that you are on the right path! Feel free to contact us at any time. We speak your language and can assist you with pleasure. We are available via e-mail.