No products
New product
For air heaters | AirTop 2000/S/ST/STC, AirTop 3500/5000/3500ST / 5000ST/Evo 3900 / 5500, |
For liquid heaters | Thermo 90/S/ST/Pro, |
Please NOTE 24v ONLY.
Manufacturer | Webasto (Germany) |
Voltage | 24 V |
BRAND NEW
Fuel pump (dosing pump)
The dosing pump is a combined supply, dosing and shut-off system to provide the heater with fuel from the vehicle’s fuel tank. The dosing pump is controlled by pulses emanating from the control unit.
Check the fuel pump.
The performance of the fuel pump is measured using the Thermo Test diagnostic tester. It is necessary to measure the amount of fuel that pumps the metering pump for a certain number of piston strokes. To do this, remove the fuel supply pipe from the heater and place it in the measuring container (20 ml). To activate the function of filling the fuel line. Perform three filling cycles. The first is needed to guarantee the filling of the fuel line, the second and third - to measure. After the dosing pump has been in operation for 60 seconds, the amount of fuel should be 20 ± 2 ml. You can also apply 256 pulses to the terminals of the dosing pump (operating voltage of the heater), the amount of fuel should be in the range from 14.5 to 17.5 ml. In case of seizure of the piston, valve,
Installation positions.
Before installing the metering pump, make sure that the excess pressure at the fuel intake is less than 0.2 bar. It is advisable to place the dosing pump in a cool place. The ambient temperature should never exceed + 20 ° C for gasoline and + 40 ° C for diesel heaters at any time. The dosing pump and fuel lines must not be installed near heat-emitting parts of the vehicle. If this is not possible, thermal insulation should be provided. The preferred installation location is near the fuel tank.
SUITABLE FOR 24V ONLY: Air Heaters:
Liquid Heaters:
|
All orders are sent well packed, protected for safe transportation. Each parcel has its own tracking number and may be tracked any time during the shipping. |
The time of delivery
Europe | 7-14 Days |
United Kingdom | |
North America | |
China | |
Japan | |
South America* | 14-22 Days |
Australia* | |
New Zealand* | |
Iseland* |
* Delivery costs to marked countries may be different from listed. Please contact us to clarify final cost
Blower Motor, Suitable for Thermo 90S, please...
$384.63