Easy Start Timer

Eberspacher Easy Start Timer

BRAND NEW

EasyStart Timer - a mini-timer salon placement of the new generation. Compact mini-timer with many functions and modes. Eberspacher EasyStart Timer allows you to adjust the operating modes (duration), start and stop the equipment. It is possible to configure the inclusion by days of the week, by groups of days (example: Mon-Fri, Sat-Sun). When the temperature sensor is connected (optional), the equipment can be switched on automatically based on the street temperature and the set departure time.

New intuitive control with a simple menu; it is possible to set the value in the range of 10-120 minutes; place in memory for three preselected moments of time for 7 days; confirmation of starting the heater + diagnostics; LED backlit display.

The new EasyStart Timer allows you to control the engine preheater, the air heater, or both of these heaters on a single vehicle. When connected to an air heater, the EasyStart Timer can be used to set the heating temperature, the duration of heating, the instantaneous activation, the permanent operation of the heater, and the transfer to ventilation mode.

Functions for Hydronic heaters: On / Off; Run on time (up to 3 settings); Launch by days of the week (group of days: Mon-Fri, Sat-Sun, etc.); Start by time of departure and temperature (option); Correction of the duration of work (from 10 to 120 minutes); Alert about insufficient battery charge; Diagnostic system for easy fault finding; The air heater can be connected; Separate control and adjustment of the water heater and air heater;

Functions for Airtronic heaters: On / Off; Temperature setting (1°C / 2°F) Transfer to forced mode; Transfer of the heater to ventilation mode; Buttons for precise target value setting (8°C–36°C) The water heater can be connected; Diagnostic system for easy fault finding. Separate control and adjustment of the water heater and air heater; Alert about insufficient battery charge;